3M Cold Shrink QS-III Splice Kit 5513A-2-CU, 15 kV, Standard, 1/case

3M Cold Shrink QS-III Splice Kit 5513A-2-CU, 15 kV – Cold Shrink Splices for Medium Voltage Cables The 3M Cold Shrink QS-III Splice Kit 5513A-2-CU is a 15 kV class inline cold shrink splice designed for joining shielded power cables such as tape shield, wire shield, UniShield®, and longitudinally corrugated (LC) shielded cables. This splice kit is sized to fit Type MV-90 or Type MV-105 cables with copper or aluminum conductors ranging from 2 AWG to 1000 kcmil (35-500 mm²). It provides a reliable, moisture-tight electrical connection suitable for medium voltage applications, supporting electrical distributors, lighting solutions, wire and cable installations, and switchgear suppliers requiring robust splice solutions. Specifications Voltage Class: 15 kV Cable Types: Tape shield, wire shield, UniShield®, longitudinally corrugated (LC) shielded power cables Conductor Size Range: 2 AWG to 1000 kcmil (35-500 mm²), copper or aluminum Compatible Cable Types: Type MV-90 or Type MV-105 Connector Outside Diameter Range: 0.40" (10.2 mm) to 1.10" (28 mm) Connector Length: Aluminum compression up to 4.50" (114 mm); Copper compression and 3M™ Shearbolt Connector QCI 2-250 up to 5.00" (127 mm) Operating Temperature Range: -40°F to 194°F (-40°C to 90°C) typical for EPDM insulation Product Weight: 7.4 lbs Country of Origin: United States (Made in USA) Manufacturer: 3M Manufacturer Part Number: 7100164856 Features Cold shrink design for easy installation without heat or special tools Pre-stretched EPDM rubber tube with live memory for permanent, durable environmental seal Suitable for shielded power cables including tape shield, wire shield, UniShield®, and LC shielded cables Accommodates copper and aluminum conductors with a wide conductor size range Includes cold shrink jacketing tube, shielding sleeve, ground strap, sealing compounds, mastic tapes, copper foil tape, cleaning pads, and instructions Designed to carry up to one-third neutral current via expanded shield sleeve Meets IEEE Std. 404 and 150 kV BIL requirements Provides moisture-tight, mechanical, and electrical protection for medium voltage cable splices Cold shrink jacketing tube is mandatory for proper installation and sealing Downloads & Links Document Instructions Document Catalogs Document Brochures Spec Sheet Safety Data Sheet