3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Tape/Wire/UniShield®Shielding, 5-15 kV, Insulation OD 0.64-1.08 in, 3/kit

3M™ Cold Shrink QT-III Termination Kit 7622-T-110 – Silicone Rubber Electrical Termination The 3M™ Cold Shrink QT-III Termination Kit 7622-T-110 is a silicone rubber indoor tubular termination designed for solid dielectric shielded power cables rated 5–15 kV. It is suitable for tape shield, wire shield, and UniShield® cable constructions. This kit is intended for use by electrical distributors and switchgear suppliers providing reliable medium voltage termination solutions. The termination meets IEEE Standard 48 Class 1 for indoor and weather-protected applications, making it suitable for use in controlled indoor environments. The kit contains three single-phase terminations per kit, facilitating efficient installation for electrical contractors and wire and cable specialists. Specifications Manufacturer: 3M Manufacturer Part #: 7622-T-110 Voltage Rating: 5–15 kV Insulation Diameter Range: 0.64" – 1.08" (16.3 – 27.4 mm) Number of Conductors: 1 Shielding Type: Tape Shield, Wire Shield, UniShield® Indoor/Outdoor Use: Indoor Non-skirted Maximum Installed Length: 12.0" (305 mm) Product Weight: 3.0390 lbs Packaging: 1 kit per case (three single-phase terminations per kit) Features One-piece, non-skirted silicone rubber termination with advanced tracking resistance and hydrophobic properties High dielectric constant (Hi-K) stress control tube and conformable stress controlling compound for reliable electrical performance Built-in environmental top seal for protection against moisture ingress Pre-stretched assembly loaded on a removable, recyclable core for ease of installation Designed for terminating solid dielectric shielded power cables rated 5–35 kV with tape shield, wire shield, and UniShield® constructions Qualified to IEEE Standard 48 Class 1 for indoor and weather-protected applications Downloads & Links Spec Sheet Spec Sheet