Conduit Riser Support Grips, Single Weave, Closed Mesh, Ring Type, 4.00" Conduit, Tin-Coated Bronze, 1.75-1.99"

Conduit Riser Support Grips, Single Weave, Closed Mesh for Cable Support This conduit riser support grip is designed for cable support in conduit applications, suitable for standard electrical rigid metal conduit and schedule 40 rigid PVC conduit. It is used primarily by electrical distributors and switchgear suppliers to provide permanent support when the cable end is available to be installed through the grip. The product is constructed with tin-coated bronze strands woven into a closed mesh single weave design, permanently fastened to a bronze support ring that mounts inside a 4-inch NPT conduit. Specifications Material: Tin-coated bronze strand with bronze ring, copper tab, and Mylar tag Conduit Size Compatibility: 4.00 inch conduit Cable Diameter Range: 1.75" - 1.99" (4.44 - 5.05 cm) Mounting: Mounts inside conduit Construction: Woven, single weave, closed mesh Width: 4.3 in Product Weight: 0.65 lbs Approximate Breaking Strength: 1,670 lbs (7,248 N) Working Load: 167 lbs (724.8 N) with recommended safety factor of 10 Country of Origin: United States Made in USA: Yes Manufacturer: Hubbell Wiring Device-Kellems Manufacturer Part Number: 02211040 Features Suitable for standard rigid metal conduit and schedule 40 rigid PVC conduit only Permanently fastened to a support ring for structural integrity Provides permanent cable support when cable end is accessible Non-magnetic tin-coated bronze strands resist corrosion Designed to absorb strain from flexure, vibration, expansion, and contraction Complies with CSA certification standards Downloads & Links Spec Sheet Catalog Full Asset Reference Catalog Page Asset Reference Warranty Document Asset Reference Pulp & Paper Solutions Sales Drawing Asset Reference PULP & PAPER SOLUTIONS FOOD & BEVERAGE SOLUTIONS