CONTACTOR, LTG, EH, OPEN, 30A, 0NC, 12NO, 277V

CONTACTOR, LTG, EH, OPEN, 30A, 0NC, 12NO, 277V Lighting Contactor This Siemens electrically held lighting contactor is designed for lighting control applications, suitable for electrical distributors and lighting solutions requiring reliable switching of lighting loads. It features a 30 Amp rating with tungsten rating of 20 Amp, supporting 0 normally closed (N.C.) and 12 normally open (N.O.) poles. The coil operates at 277V 60Hz or 240V 50Hz, making it compatible with standard lighting control voltages. This non-combination type contactor is built with an open NEMA enclosure and is made in the USA, supporting wire and cable connections with screw-type terminals. Specifications Manufacturer: Siemens Manufacturer Part #: LCE00C012277A Contactor Size: 30 Amp Number of N.O. Contacts: 12 Number of N.C. Contacts: 0 Coil Voltage: 277V AC at 60 Hz / 240V AC at 50 Hz Operating Voltage (Main Circuit): Up to 600V AC Type of Main Contacts: Silver alloy, double break Mechanical Service Life: 100,000 operating cycles Weight: 3 lb Dimensions (H x W x D): 7.39 × 4.18 × 3.86 inches Enclosure: NEMA open device (no enclosure) Mounting Position: Vertical, surface mounting Wire Range (Line and Load Side): 2x (14–8 AWG), copper only Tightening Torque (Supply and Load Terminals): 35 lbf·in Tightening Torque (Magnet Coil Terminals): 15 lbf·in Short-Circuit Current Rating: 100kA @ 600V (Class R or J 40A max fuse link required) Maximum Short-Circuit Breaking Capacity: 24 kA at 240V, 65 kA at 480V, 25 kA at 600V Ambient Temperature Range (Operation): -13 to +104 °F (-25 to +40 °C) Country of Origin: United States Certifications: NEMA ICS 2, UL 508 Features Electrically held lighting contactor convertible to mechanically held operation Power poles convertible between normally open (NO) and normally closed (NC) Finger-safe touch protection for main and control circuits Compatible with tungsten, ballast, and resistive loads with specific contact ratings Surface mounting installation with screw-type terminals for reliable wiring connections Designed for use with copper conductors only High mechanical durability with 100,000 operating cycles Made in USA, ensuring quality and compliance with industry standards Downloads & Links 2D Wiring Diagram Technical data sheet