Eaton C30CN mechanically held lighting contactor, 30 A, 110 V/50 Hz, 120 V/60 Hz, 30 A, NEMA 1, Painted steel, Ten-pole, MECH held and MAG latched, C30CN Series, Non-combination electrically and mechanically held

Eaton C30CN Mechanically Held Lighting Contactor – Lighting Solutions The Eaton C30CN lighting contactor is designed for reliable control of lighting loads in commercial and industrial applications. It is suitable for electrical distributors and switchgear suppliers managing lighting solutions, wire and cable systems, and control panels. This contactor is mechanically held, ensuring it remains in the ON position during power failure, providing stable and quiet operation. It supports tungsten, fluorescent, HID, and non-motor AC resistive loads, making it versatile for hospitals, office buildings, industrial plants, airports, and stadiums. Specifications Name: Eaton C30CN mechanically held lighting contactor, 30 A, 110 V/50 Hz, 120 V/60 Hz, 30 A, NEMA 1, Painted steel, Ten-pole, MECH held and MAG latched, C30CN Series, Non-combination electrically and mechanically held Amperage: 30 amperes Coil Voltage: 120 volts Enclosure Material: Painted Steel Width: 6 in Height: 12.6 in Length: 7.62 in Product Weight: 11.9 lbs Manufacturer: Eaton Manufacturer Part #: ECC04C1AAA Features Mechanically held operation prevents switching off during power failure, ideal for critical lighting control applications. Low magnetic noise for quiet, energy-efficient operation. Modular power poles (2–12 poles) with easy latch-on design; poles can be designated as normally open (NO) or normally closed (NC) by simple repositioning. Additional poles can be added on-site without replacing the contactor. Low input VA allows long wire runs. Wide range of coil voltages available (24 Vac to 277 Vac, 12 Vdc to 24 Vdc). Enclosed contacts resist contaminants to enhance reliability. Finger and back-of-hand safe power terminals accept up to two #8 AWG wires. Plug-in auxiliary contacts rated A600, suitable for low-level circuits down to 12V, 5 mA. Fast, sure three-point mounting for easy installation. Available in NEMA 1 enclosures with options for 3R, 12, 7/9, and 4X enclosures as combination or non-combination units. Compatible with two-wire or three-wire control schemes for flexible operation. Downloads & Links Lighting Contactors Eatons Volume 10-Enclosed Control