FLUKE-T5-600, Electrical Voltage Tester

FLUKE-T5-600 Electrical Voltage Tester - Electrical Testing and Troubleshooting Tool The FLUKE-T5-600 Electrical Voltage Tester is a compact, versatile tool designed for electrical distributors, lighting solutions providers, and switchgear suppliers to perform voltage, continuity, and current testing efficiently on-site. Suitable for troubleshooting electrical installations, this tester simplifies electrical diagnostics by combining multiple functions in one device, facilitating quick and reliable wire and cable inspections. Specifications Maximum Voltage Between Terminals and Earth Ground: 600 V rms, Overvoltage Category III, Pollution Degree 2 Maximum Voltage Between Current Fork and Earth Ground: 1000 V rms, Overvoltage Category III; 600 V rms, Overvoltage Category IV (current fork only) Operating Temperature Range: -10 °C to +50 °C (14 °F to 122 °F) Storage Temperature Range: -30 °C to +60 °C (-22 °F to 140 °F) Operating Altitude: 2000 m (6562 ft); Storage Altitude: 10,000 m (32808 ft) Relative Humidity: 0% to 95% at 5 °C to 30 °C, decreasing at higher temperatures Battery Type and Life: 2 AA batteries; 360 hours continuous use with alkaline batteries Accuracy: Voltage ±(1.5% + 2 digits) for AC, ±(1% + 1 digit) for DC; Current ±(3% + 3 digits); Resistance ±(1% + 2 digits) Resolution: 1 V for voltage, 0.1 A for current, 1 Ω for resistance Enclosure Rating: IP52 per IEC 60529 (no vacuum applied) Safety Standards: Complies with ANSI/ISA-S82.01-94, UL Classified to IEC 61010, CSA/CAN C22.2 No.1010.1-92, EN61010-1 Surge Protection: 6 kV per IEC 61010 Dimensions: Approximately 21 cm (8.25 inches) length Weight: 0.1 kg Features Multi-function tester for voltage, continuity, and current measurements in one compact tool Automatic AC/DC voltage selection for ease of use Current measurement via a built-in current fork for non-contact current testing up to 100 A Continuity and resistance testing with audible beeper for quick wire verification Hazardous voltage indicator LED for enhanced safety awareness during testing Display HOLD function to freeze readings for easier recording Robust design with IP52 rating for dust and splash resistance in typical job site environments Long battery life for extended use on job sites Compliance with industry safety and EMC standards ensures reliable performance in electrical distribution and lighting systems Downloads & Links Other 2 Installation/Operator Other 3 Data Sheet Catalog Other 1