High/Low PIR Fixture Mount Sensor Line Voltage

High/Low PIR Fixture Mount Sensor Line Voltage - Outdoor Motion Sensor The High/Low PIR Fixture Mount Sensor Line Voltage by WattStopper is designed for multi-level lighting control in outdoor fixtures. It provides occupancy and daylight-based dimming control for 0-10 VDC dim-to-off LED drivers or ballasts and supports line voltage On/Off switching. This sensor is suitable for outdoor lighting applications such as parking facilities, gas stations, pedestrian pathways, and warehouses. It is configurable via a wireless handheld tool, enabling precise adjustment of lighting levels, time delays, and daylight setpoints, making it an efficient choice for electrical distributors and lighting solution providers. Specifications Manufacturer: WattStopper Manufacturer Part #: FSP-211 Input Voltage: 120/277VAC, 230–240VAC (single phase); 50/60Hz Load Ratings: @120VAC: 0–800W tungsten, ballast, LED driver; 1/6hp motor @230-240V: 0–300W ballast, LED driver @277VAC: 0–1200W ballast, LED driver; 1/6hp motor High Mode Output: 0-10 V; default 10 V Low Mode Output: Off, 0-9.8 V; default 1 V Time Delay: Adjustable from 30 seconds to 30 minutes; default 5 minutes Cut Off Delay: Optional, from none to 1-5 hours; default 1 hour Sensitivity/Service Mode: Low, medium, max; default max Operating Temperature: -40 to 167°F (-40 to 75°C) Operating Humidity: 20–90% Dimensions (HxWxD): 3.7 in x 1.0 in x 2.0 in Weight: 2.8 oz (80 g) Construction: Polycarbonate; flame retardant, UV resistant, impact resistant, recyclable Certifications: UL244A, UL508, IP66 (when fully assembled and installed), TUV, CE, RoHS compliant Country of Origin: China Features Multi-level control based on motion and/or daylight contribution Controls 0-10 VDC dim-to-off LED drivers or ballasts, and supports line voltage On/Off switching High and low dimmed light levels fully adjustable from 0 to 10 V Adjustable time delay and optional cut off delay for flexible lighting management Wireless handheld configuration tool for easy setup and parameter adjustment Automatic or manual daylighting setpoint calibration IP66 rated with choice of lenses for wet and outdoor locations, suitable for mounting heights from 8 ft. to 40 ft. Designed for LED fixtures; rated for extreme temperatures and up to 200,000 on/off cycles BAA/TAA-compliant models available Downloads & Links FSP-2x1 High/Low/Off PIR Fixture Integrated Outdoor Photo/Motion Sensor Cutsheet Passive Infrared Fixture Integrated Outdoor Sensor operating at 277V FSP-Lx Lens Coverage Guide FSP-211 High/Low/Off, PIR Fixture Integrated Outdoor Sensor (Trilingual) FSP-Lx Lenses for Passive Infrared Fixture Integrated Occupancy Sensors FSP-2x1 Low Voltage High/Low/Off PIR Fixture Integrated Outdoor Sensor Datasheet Passive Infrared Fixture Integrated Outdoor Sensor operating at 120V