INDOOR MOTION SENSORS LOS1000I 120V

INDOOR MOTION SENSORS LOS1000I 120V – Occupancy Sensor for Lighting Control The RAB Indoor Motion Sensor LOS1000I 120V is a smart occupancy sensor designed for energy-efficient lighting control in indoor environments. It is ideal for electrical distributors and lighting solutions providers seeking reliable motion detection technology to automatically control lighting loads in commercial and office spaces. The sensor integrates easily into existing wiring systems, replacing single pole wall switches without additional wiring, making it suitable for wire and cable installations and switchgear suppliers focusing on energy code compliance. Specifications Coverage: 1000 square feet, up to 35’ from the sensor Detection Zone: 180° in 18 zones, 32’ range, vertical beam 5” wide Time Adjustment: 30 seconds to 30 minutes after motion stops Detection Indicator: Red LED Energy Codes: Meets new energy code standards, complies with California Title 24 Switching Capacity: 120 VAC: Max 1000W ballast, Max 800W incandescent, 60 Hz, 1/8 HP 277 VAC: Max 1800W ballast, 60 Hz, 1/8 HP Minimum Load: None Power Consumption: Less than 500 microamps Wiring: Replaces single pole wall switch, 2 wire system Temperature Range: -30° to +122°F (-1° to +50°C) Humidity Range: 20% to 90% non-condensing Approvals: UL Listed, Appliance Control Specification Grade, UL Standard 508 Industrial Control Equipment Weight: 8 ounces (266 grams) Dimensions: A = 4.06” (103mm) B = 1.69” (43mm) C = 2.25” (57mm) D = 2.56” (65mm) E = 1.25” (32mm) F = 5” (13mm) G = 1.68” (43mm) Manufacturer Part #: LOS1000I/120 UPC: 019813741017 Product Weight: 0.3 lbs Features Sensitive 180° passive infrared motion detector with 18 sensing fingers for no dead spots No ON switch to prevent lights being left on by mistake Works with dimmers and programmed rapid start electronic ballasts (not compatible with Instant Start ballasts) No minimum load requirement Fits decorator style rectangular switchplates with only 1/2” protrusion LED detection indicator for walk testing and adjustment 30 second minimum delay time for fast testing Tamperproof control panel cover to reduce callbacks Switches most types of fluorescent and incandescent lighting Wide time delay adjustment from 30 seconds up to 30 minutes Superior RF immunity and does not interfere with computers Compact design fits standard switch boxes with ample wiring room Bypass key for emergency override to keep lights on continuously Downloads & Links Instructions