Single-Use Wire Grabber 1/0 w/28" Lanyard

Single-Use Wire Grabber 1/0 w/28" Lanyard – Wire Pulling Tool The Single-Use Wire Grabber 1/0 w/28" Lanyard by RectorSeal is a disposable wire pulling device designed for efficient and reliable wire installation. Suitable for use with THHN and XHHW copper and aluminum wire, it supports wire sizes from 8 AWG up to 1000 MCM and is rated for voltages from 600 volts up to 35 KV. This tool simplifies wire pulling tasks by eliminating the need for taping, trimming, or tying wires, making it a practical solution for electrical distributors and switchgear suppliers involved in wire and cable installations. Specifications Manufacturer: RectorSeal Manufacturer Part Number: 98143 Wire Size: 1/0 AWG Lanyard Length: 28 inches Maximum Load Capacity: 2,000 lbs (single tool), 10,000 lbs (five tools) Minimum Conductor Diameter: 0.336 inches Maximum Conductor Diameter: 0.373 inches Minimum EMT Conduit Size: 1 inch (1 wire), up to 2 inches (5 wires) Product Weight: 1.08 lbs Voltage Rating: 600 Volts through 35 KV Compatible Wire Types: THHN & XHHW Copper and Aluminum Wire Recommended Crimping Tool: 12 to 15 ton die or dieless crimper for wires 500 MCM and smaller; 15 ton crimper for 600 MCM to 1000 MCM Features Disposable single-use design reduces setup time and waste Beveled edge facilitates easier pulls around corners Staggered lanyards reduce pulling friction and conduit congestion Lugs are crimped securely at colored bands matching crimping die size Compatible with both copper and aluminum wire Low initial cost and easy to use Recyclable along with scrap wire after use Downloads & Links Flyer - English Spec Sheet