Single-Use Wire Grabber 250 MCM w/35" Lanyard

Single-Use Wire Grabber 250 MCM w/35" Lanyard – Wire Pulling Tool The Single-Use Wire Grabber 250 MCM with a 35-inch lanyard is a disposable wire pulling device designed for efficient electrical wire installation. Suitable for use with THHN and XHHW copper and aluminum wires, it supports wire sizes up to 250 MCM. This tool simplifies wire pulling by eliminating the need for taping or tying wires, reducing labor time and costs for electrical distributors and switchgear suppliers. Its design includes a beveled edge for easier pulls around corners and staggered lanyards to reduce pulling friction, making it a practical solution in lighting solutions and wire and cable applications. Specifications Wire Size: 250 MCM Lanyard Length: 35 inches Maximum Load (One Tool): 2000 lbs Maximum Load (Five Tools): 10,000 lbs Minimum Conductor Diameter: 0.520 inches Maximum Conductor Diameter: 0.575 inches Minimum EMT Conduit Size: 1 1/4 inch (1 wire), 2 inches (2 to 5 wires) Rated Voltage: 600 volts through 35 kV Material Compatibility: Copper and Aluminum Wire Product Weight: 3.72 lbs Features Disposable lugs crimped onto wire for single use Low initial cost and time-saving setup Beveled edge for easier pulling around corners Staggered lanyards reduce pulling friction and conduit congestion Color-coded crimp bands match crimping die size for secure installation Compatible with 12 to 15 ton hydraulic or dieless crimpers Downloads & Links Flyer - English Spec Sheet