Single-Use Wire Grabber 500 MCM w/21" Lanyard

Single-Use Wire Grabber 500 MCM w/21" Lanyard – Wire Pulling Tool The Single-Use Wire Grabber 500 MCM with a 21-inch lanyard is a disposable crimp-on device designed for efficient wire pulling applications. It is engineered for use with THHN and XHHW copper and aluminum wire, rated for voltages from 600 volts up to 35 kV. This tool is suitable for electrical distributors, lighting solutions providers, wire and cable installers, and switchgear suppliers requiring a reliable, low-cost solution to pull wires through conduit with reduced labor and setup time. Specifications Wire Size: 500 MCM Max Load (One Tool): 4000 lbs Max Load (Five Tools): 20000 lbs Minimum Conductor Diameter: 0.736 in Maximum Conductor Diameter: 0.813 in Minimum EMT Conduit Size (1 Wire): 1 1/2 in Minimum EMT Conduit Size (2 Wires): 2 1/2 in Minimum EMT Conduit Size (3 Wires): 2 1/2 in Minimum EMT Conduit Size (4 Wires): 3 in Minimum EMT Conduit Size (5 Wires): 3 1/2 in Crimper Required: 15 ton die crimper Product Weight: 5.24 lbs Features Disposable lugs that are crimped onto the wire and recycled with scrap wire Beveled edge design for easier pulls around corners Staggered lanyards reduce pulling friction Longer lanyard length reduces congestion in conduit Low initial cost and quick setup, enabling up to four times more wire pulls per day Compatible with both copper and aluminum wire Secure crimping with color-coded bands matching crimping die size Downloads & Links Flyer - English Spec Sheet