WATTSTOPPER DSW-302-347-LA DUAL TECHNOLOGY WALL SWITCH OCCUPANCY SENSOR 347V LT. ALMOND

WATTSTOPPER DSW-302-347-LA Dual Technology Wall Switch Occupancy Sensor 347V The WATTSTOPPER DSW-302-347-LA is a dual technology wall switch occupancy sensor designed for controlling lighting loads based on occupancy detection. It integrates passive infrared (PIR) and ultrasonic sensing technologies to provide high sensitivity to both small and large movements. This sensor is suitable for electrical distributors and lighting solutions providers seeking reliable occupancy-based lighting control in commercial and industrial environments. It replaces existing wall switches and fits standard decorator wall plates, making it compatible with typical wire and cable installations. Specifications Voltage: 347 VAC, 50/60 Hz Load Limits Relay 1: 1500 W ballast, LED, 1/4 HP Load Limits Relay 2: 1500 W ballast, LED, 1/6 HP Amperage: 4.3 A Wattage: 1500 W Sensor Type: Occupancy (Dual Technology - PIR and Ultrasonic) Time Delay Adjustment: 5 to 30 minutes Walk-Through Mode: Turns load off after 3 minutes if no activity detected after 30 seconds Test Mode: 10 minutes with 5-second time delay PIR Sensitivity: High or Low (50%) Ultrasonic Sensitivity: Adjustable from Minimum to Maximum or Off Ultrasonic Frequency: 40 kHz Light Level Adjustment: 8 foot-candles to 180+ foot-candles (only affects Relay 2) Alerts: Selectable audible and visual alerts Optional Neutral Wiring: Available Multi-Way Capability: Supports up to 4 sensors on the same circuit Dimensions: 4.8 in (H) x 3.0 in (W) x 2.48 in (D) Product Weight: 0.47 lb Color: Light Almond Country of Origin: China Features Dual relays allow independent control of two separate lighting loads or circuits Combines PIR and ultrasonic technologies to reduce false triggers and increase detection accuracy Selectable operating modes: Manual ON or Auto ON for each relay Manual ON mode requires occupant to press ON/OFF button to turn on load; Auto ON mode enables automatic occupancy-based switching Presentation Mode prevents automatic turn-on after manual turn-off for energy savings Walk-Through Mode shortens time delay for brief occupancy events Adjustable PIR sensitivity and ultrasonic sensitivity for tailored detection coverage Light level sensor holds load OFF when adequate daylight is detected (affects Relay 2 only) Compatible with standard decorator wall plates for easy installation Multi-way wiring capability allows multiple sensors to control the same load with synchronized operation Includes masking tape to block PIR sensor coverage in unwanted areas Audible alerts warn occupants before lights turn off Durable metal mounting bracket for secure installation in standard wall boxes Downloads & Links Spec Sheet Spec Sheet Spec Sheet