Wattstopper® Passive Infrared Wall Switch Occupancy Sensor, 24V, Black

Wattstopper® Passive Infrared Wall Switch Occupancy Sensor, 24V, Black - Occupancy Sensor The Wattstopper® PW-100-24 is a passive infrared (PIR) low voltage wall switch occupancy sensor designed for automatic lighting control in commercial and residential applications. As a reliable electrical distributor and lighting solutions component, it integrates seamlessly with Wattstopper power packs to provide efficient occupancy-based lighting control. This sensor detects occupancy and automatically turns lighting loads on or off based on presence and ambient light levels, optimizing energy use and enhancing convenience. It is suitable for use in spaces up to 15' x 12' and is compatible with industry-standard decorator-style wall plates. Specifications Voltage: 18-24 VDC, 24 VAC or Half-wave rectified AC Current Consumption: 20 mA Power Supply: Wattstopper Power Packs Isolated Relay Rating: 1A @ 30 VDC/VAC Time Delay Adjustment: 5 to 30 minutes Walk-Through Mode: Turns load off after 3 minutes if no activity detected after 30 seconds Test Mode: 5 seconds for 10 minutes (DIP switch setting) PIR Sensitivity Adjustment: High or Low (DIP switch) Light Level Adjustment: 8fc to 180+fc Alerts: Selectable Audible & Visual Coverage Area: Up to 15' x 12' (4.5m x 3.6m) Sensor Field of View: 180 degrees, two-tiered multi-cell Fresnel lens Country of Origin: China Manufacturer: Pass & Seymour Manufacturer Part #: PW10024B Product Weight: 3.8 lbs Features Advanced passive infrared technology for reliable occupancy detection Manual ON or Auto ON modes selectable via DIP switch for flexible control Light level sensor to prevent lights from turning on when adequate daylight is present; override available via ON/OFF button Walk-through mode reduces lighting time for brief occupancy Selectable audible and visible alerts provide warnings before lights turn off Adjustable PIR sensitivity to reduce false triggers caused by movement outside desired areas or heat sources Opaque adhesive tape included for masking sensor lens to eliminate unwanted coverage zones Isolated relay with normally open and normally closed contacts for versatile wiring options Compatible with industry-standard decorator wall switch cover plates (cover plates not included) Red LED indicator flashes upon motion detection Easy installation with clear wiring instructions and DIP switch settings Downloads & Links Spec Sheet PW-100-24 Passive Infrared Low Voltage Wall Switch Sensor PW-100-24 Low Voltage Wall Switch Occupancy Sensor (TriLingual) 57-302 - Typical Wiring DW-100-24/PW-100-24/UW-100-24 PW-100-24 Passive Infrared Low Voltage Wall Switch Sensor AIA Division 16 Specifications-Occupancy Sensor