Wattstopper® PIR Multi-Way Dual-Relay, Wall Mounted Occupancy Sensor, 800W at 120V/1200W at 277V, Ivory

Wattstopper® PIR Multi-Way Dual-Relay, Wall Mounted Occupancy Sensor, 800W at 120V/1200W at 277V, Ivory The Wattstopper PW-302 passive infrared (PIR) wall switch sensor is designed for occupancy-based lighting control in small enclosed spaces such as offices, conference rooms, and break rooms. This dual-relay sensor enables independent control of two lighting loads or circuits, supporting multi-way wiring from up to four locations. It is suitable for retrofit or new installations, compatible with both 2-wire and 3-wire electrical connections. The sensor integrates advanced PIR technology to detect occupancy and automatically turn lighting loads on or off, with configurable modes including manual and automatic ON, walk-through, and test modes. Its features make it ideal for electrical distributors and switchgear suppliers providing lighting solutions and wire and cable components. Specifications Voltage: 120/240/277 VAC, 50/60 Hz Load Capacity Relay 1: 800W at 120V, 1200W at 277V (tungsten ballast, electronic ballast, LED, 1/4 HP) Load Capacity Relay 2: 800W at 120V, 1200W at 277V (tungsten ballast, electronic ballast, LED, 1/6 HP) Dimensions (H x W x D): 2.73" x 1.75" x 1.81" Number of Poles: Multi-Location Country of Origin: China Manufacturer: Pass & Seymour Manufacturer Part Number: PW302I Weight: 4.85 lbs Compliance: UL and cUL Listed, 2017 NEC requirements Coverage: Major motion 35’ x 30’, Minor motion 20’ x 15’ (per NEMA WD 7) Features Two relays for independent control of two lighting loads or circuits Selectable Manual ON or Auto ON mode for each relay Walk-through mode turns lights off after 3 minutes if no motion detected Light level sensor holds secondary lights off when ambient light is sufficient (affects Relay 2 only) Audible and visible alerts warn before load shutoff Vandal-resistant lens with 180° field of view and multi-cell Fresnel design Multi-way wiring capability for up to four control locations Optional neutral connection via breakaway tab for 2-wire or 3-wire installation Test mode for quick sensor adjustment LED indicator signals occupancy detection Service mode allows manual control in case of sensor failure Compatible with industry-standard decorator wall plates Downloads & Links PW-301/302 Passive Infrared Sensors (TriLingual) Spec Sheet Cleaning Instructions for Wiring Devices PW-302 Passive Infrared Dual Relay Wall Switch Occupancy Sensor